Jump to content
Kevin

Amerigo Vespucci 1/84 - Panart- by Kevin restarted June 2020

Recommended Posts

welcome to my restarted Amerigo and not the Cutty Sark as promised
 

12 years ago i purchased the Amerigo Vespucci, which at that time was my second POB kit the Royal Caroline was the first

 

i was still in the Royal navy at that time and away from home quite a bit, so i never got into a routine with her, by the time i had the time, the Victory replaced her

 

as a result she has got into quite a mess with a hole in the hull and some damage on the bulkheads above the main deck

 

i have many reasons for this being my next build,

i enjoyed the rigging on the victory and wants another 3 masted ship

i dont have all the information to start the Trawler St Nectan

other reason are that i have plans to retire within two years so the trawler and several other builds i want to buy will be paid for before i leave employment

 

although i bought it as the whole kit, it is also available in 9 parts, which makes it a lot more expensive,  i have ordered two parts to enable me to restart her

here are a few pictures taken back when first started in 2008

1397030025_hobbyamerigovespucci(89).JPG.a27c54633d221b11e4cd5b34f1f0c43c.JPG322703232_hobbyamerigovespucci(100).thumb.JPG.9786dc567873043de4b93310efa20241.JPG301005710_hobbyamerigovespucci(111).thumb.JPG.9d01d4d13fa8dd06472d26b4a14d0c1f.JPG1039844112_hobbyamerigovespucci(122).thumb.JPG.cfc7ac512484745613d1912b37225c8f.JPG216393889_hobbyamerigovespucci(133).JPG.ddc63478423b6f377058460c9906c8d8.JPG188860598_hobbyamerigovespucci(2).thumb.JPG.455e3e8af269dfb1687c10d904f43c24.JPG1548059290_hobbyamerigovespucci(14).thumb.JPG.e63766f0843b500beef459204ce40365.JPG1980759529_hobbyamerigovespucci(25).thumb.JPG.7323092b5a1e4fef489f738f33c8d7ec.JPG571106455_hobbyamerigovespucci(36).thumb.JPG.c350f886b2048b1b1a0deb3d64771a47.JPG1349309256_hobbyamerigovespucci(54).thumb.JPG.03ac33be5e0cff5fb2338f548ea1d8fc.JPG241234270_hobbyamerigovespucci(56).thumb.JPG.812433f6941642a4d56c8268709d06b6.JPG277873391_hobbyamerigovespucci(62).thumb.JPG.378248b5b89aca4c34b365c6871ce08c.JPG622482946_hobbyamerigovespucci(67).thumb.JPG.04d54b4ba491e0c46d724dd5998d4ad7.JPG158951463_hobbyamerigovespucci(75).thumb.JPG.c16163a9dbcb455641aed3e8d7a46c45.JPG29867641_hobbyamerigovespucci(82).JPG.cbe4ef45639b22ccadf730e7994c0a9b.JPG793879659_hobbyamerigovespucci(104).thumb.JPG.3a53d62693c655a98d0cfa371d239aca.JPG1369772588_hobbyamerigovespucci(116).thumb.JPG.674592c8b01f71f14b7e0a272d5dd938.JPG290954364_hobbyamerigovespucci(50).JPG.46d79dcac2a90928090e80a5a45d9420.JPG2060772467_hobbyamerigovespucci(48).thumb.JPG.1fa25410e15ade86be90eafcc8d45d2f.JPG

 

  • Like 3

Share this post


Link to post
Share on other sites

n 1925, the Regia Marina ordered two school ships to a design by General Lieutenant Francesco Rotundi of the Italian Navy Engineering Corps, inspired by the style of large late 18th century 74-cannon ships of the line (like the neapolitan ship "Monarca"). The first, the Cristoforo Colombo, was put into service in 1928 and was used by the Italian Navy until 1943. After World War II, this ship was handed over to the USSR as part of the war reparations and was shortly afterwards decommissioned.[citation needed]

The second ship was the Amerigo Vespucci, built in 1930 at the (formerly Royal) Naval Shipyard of Castellammare di Stabia (Naples). She was launched on February 22, 1931,[1] and put into service in July of that year.

The vessel is a full rigged three-masted steel hull 82.4 m (270 ft) long, with an overall length of 101 m (331 ft) including the bowsprit and a maximum width of 15.5 m (51 ft). She has a draught of about 7 m (23 ft) and a displacement at full load of 4146 tons. Under auxiliary diesel-electric propulsion the Amerigo Vespucci can reach 10 knots (19 km/h) and has a range of 5450 nm at 6.5 knots.

220px-Amerigo_Vespucci%2C_Akershus_Festn
 
The Amerigo Vespucci in the harbor of Oslo, 2005. Akershus Fortress in the background.
220px-Amerigo_Vespuc%D1%81i_%26_Ivlia.jp
 
The Amerigo Vespucci & bireme Ivlia. Portoferraio island Elba, 1991.

The three steel masts are 50, 54 and 43 metres high, and carry sails totalling 2,824 m2 (30,400 sq ft). The Amerigo Vespucci has 26 sails – square sails, staysails, and jibs: all are traditional canvas sails. When under sail in severe sea and wind conditions she can reach 12 knots (22 km/h). The rig, some 30 km of ropes, uses only traditional hemp ropes; only the mooring lines are synthetic, to comply with port regulations.

The hull is painted black with two white stripes, harking back to the two gun decks of the ships her design is based on, but she carries only two 6pdr saluting guns in pivot mountings on the deck, forward of the mainmast. The deck planks are of teak wood and must be replaced every three years. Bow and stern are decorated with intricate ornaments; she has a life-size figurehead of Amerigo Vespucci. The stern gallery is accessible only through the Captain's saloon.

The standard crew of the Amerigo Vespucci is 16 officers, 70 non-commissioned officers and 190 sailors. In summer, when she embarks the midshipmen of the Naval Academy (Accademia Navale), the crew totals some 450.[citation needed]

In 1964 the ship was fitted with two 4-stroke, 8-cylinder FIAT B 308 ESS diesel engines, which replaced the original 2-stroke 6-cylinder FIAT Q 426 engines. These engines generated electric power for one electric propulsion motor that produced up to about 1,471 kW (1,973 hp).[citation needed]

After update works, between 2013 and 2016, the ship has been fitted with two 4-stroke, 12-cylinder MTU, 1,32 MW each diesel engine generators and two 4-stroke, 8-cylinder MTU, 760 kW each diesel engine generators,[2] and one NIDEC (Ansaldo Sistemi Industriali) electric engine.[3][4] During the same work, the ship has been fitted with new radar GEM Elettronica AN/SPS-753(V)5, new satellite antenna ORBIT AL-7103.

When carrying cadets, the ship is usually steered from the manual stern rudder station, which is operated by four steering wheels with two men each. At other times, the hydraulically assisted steering on the bridge is used. Except for the anchor winch, the winches aboard are not power operated. The bridge is equipped with sophisticated modern electronic navigation instruments.

Other than during World War II, the Amerigo Vespucci has been continually active. Most of her training cruises are in European waters, but she has also sailed to North and South America, and navigated the Pacific. In 2002, she undertook a voyage around the world.

The Amerigo Vespucci often takes part in sailing parades and Tall Ships' Races, where she is in amicable rivalry with the Gorch Fock. When she is berthed in port, public tours of the vessel are usually offered.

On 7 July 2018, Amerigo Vespucci arrived to the port of Almeria.[5] It is the third time it visited Almería:[6] the first one was in 1932,[7] and the second one was in 1989.[8] It left the city on 10 July.[9] Then it will travel to Ponta Delgada, in the Azores Islands, and it will cross the Atlantic Ocean to the Northern Europe.[10][11]

 
Quote  0
 
FM Member1,609 posts
kevinaris14 minutes ago

on 12 years 

IMG_3857.thumb.JPG.c18bddf7997487a7d382b915fa2a3cd1.JPG

and as of yesterday, i was taking her back to whats good in the hull

IMG_3880.thumb.JPG.64acdfc34d7f15a148d099c2b696c7d1.JPG

well i have ordered parts 2 and 5 of the set which have arrived, i also ordered 1.5mm plywwod sheets to replace the decks, 2mm thick balsa sheet for the 1st planking and lime strips for the 2nd planking

 

all the main deck bulkheads will be remade, the hull be be reinforced to stop damage when drill portholes, and this build will have sails,

 

some of the fittings will be scratched as they are very basic, 

IMG_3885.JPG

IMG_3895.JPG

 

IMG_6914.thumb.JPG.aaa95f5c2b191e8324a300298cd5cc7b.JPGIMG_6915.thumb.JPG.5dd3ae5978ac90ae7a472e3fb553820d.JPGIMG_6916.thumb.JPG.040a9db06ec886979fb34400447f71e6.JPGIMG_6917.thumb.JPG.01542da98db89b383d2efe05f171dc35.JPGIMG_6918.thumb.JPG.28342210e9cf8234135d5ab7be8574ca.JPGIMG_6919.thumb.JPG.65a0f5bfd93fba499d94641c4e1ce031.JPGIMG_6920.thumb.JPG.16d5da1216f080b75eb49d802f12d672.JPGIMG_6921.thumb.JPG.fd675a2ac86f1c188711712bf773f3dc.JPGIMG_6922.thumb.JPG.c3dd701fb68b5f7532f8f4a17ef9ceca.JPG

 

 
 
  • Like 4

Share this post


Link to post
Share on other sites

Don't take another 12 years to finish this one please..I want to be around to see the end result. 😁

You are a glutton for punishment aren't you ?

I'm sure another masterpiece will appear though.

  • Like 1

Share this post


Link to post
Share on other sites
7 hours ago, RWG686 said:

Don't take another 12 years to finish this one please..I want to be around to see the end result. 😁

You are a glutton for punishment aren't you ?

I'm sure another masterpiece will appear though.

its going to be another long build, even to get where i was, and yes it would be simpler to just bin the hull and get another hull set, but i dont want to do that, we dont have that many big wooden hull builds here on Brexit so bear with me, the Dorade will still be the main build

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, Invictaag said:

I'll be following you on this build Kevin, I haven't seen this ship built before.

lol neither have i, well not my own

Share this post


Link to post
Share on other sites

well the expensive  Amerigo kit is well and truly back from the shelf of doom and on the build table, and actually going forwards again as i correct the damage and try to make some bits better

 

the two holes have been repaired, just a bit more sanding required, i made the holes larger, frame to frame, put an extra ledge in to give me some support

IMG_6918.thumb.JPG.4b8d37e88e4b71fe673a00ffa29f0c23.JPGIMG_6931.thumb.JPG.1e44291ba6cab3886016beaea2015de3.JPGIMG_6934.thumb.JPG.d78060307842677fb5541ba0eca46bf1.JPGIMG_6935.thumb.JPG.172b81312753c939c100db9ad7e5f283.JPGIMG_6938.thumb.JPG.c356ae8eebb8ffabebf4205b169aeccf.JPGIMG_6939.thumb.JPG.c8f3c6e41a3f6f3ad3e8ea6b1477905a.JPG

the stern above the water line was always my second biggest concern (the bow wins first place) but most of has been ripped out cleaned up and where possible replaced 

 

before the rip out

915882352_hobbyamerigo(4).JPG.7abec55c20966e69c7db3bd21e213cfa.JPG 

IMG_6920.thumb.JPG.41be26a423e39c989723c0dc6fe63273.JPGIMG_6924.thumb.JPG.d5e957d2b034fdb3c375e918422f6fbe.JPGIMG_6928.thumb.JPG.1e0ac558d8e6305d26e063feeecc5eea.JPGIMG_6929.thumb.JPG.a4ece3ab8c5c70d5d5b00462d95f853c.JPGIMG_6943.thumb.JPG.655514532786516095d1dfb67afeb067.JPGIMG_6944.thumb.JPG.8042b39753712dbc6536c8e3fa29116b.JPGIMG_6945.thumb.JPG.ae047c841512da8915e17bc5a0ffa5cc.JPGIMG_6946.thumb.JPG.6a135a1eb1c8b33b690a7ee812e7ac65.JPG

  • Like 4

Share this post


Link to post
Share on other sites
13 minutes ago, Grunhertz said:

Woah still it's probably easier than plastic to fix.....

agreed, wood is very forgiving

Share this post


Link to post
Share on other sites

well this is going better than planned

 

good evening everyone

 

quite glad i have gone ahead to try and salvage this build, having planned a way ahead the stern and midships are now taking shape, I started on the bow tonight and that is the worst mess to sort out, god what the hell was i doing when i started this 12 odd years ago

 

Stern i just used sheets of balsa to allow some reshaping of the sten to get the balcony to fit, having said that it is nearly there, as it is all fitting better, not pretty, but i am not either

 IMG_6949.thumb.JPG.3493d5c1c6b99327060a280cbd11e9f4.JPGIMG_6950.thumb.JPG.cf7405460f9a95c563e8f88b5a1a3763.JPGIMG_6951.thumb.JPG.aeca5db9c830ef7ac7d9b3ff07a6787e.JPG

 

midships 

between the bulkheads i have put some balsa sheets it, to try and minimise any damage when drill the portholes, wether it works i will let you know

the deck chamfer is not catered for, between the bulkhead, and as i have cut some of the false deck they also needed something to be secured to

Bulwarks, this was worrying me, as the bulwark supports were cut out before deck planking last time so i never had a height, but i salvaged to two made last time and used the height from them

IMG_6971.thumb.JPG.e960b45995bca3c2a70cedabd6a7a2b9.JPGIMG_6974.thumb.JPG.d08e9cfc1bbb563d48114543c66defc7.JPGIMG_6975.thumb.JPG.8dd2e04ba402add751cc561e375c26a1.JPGIMG_6977.thumb.JPG.756f3d974e48649e68e2879a226036df.JPGIMG_6978.thumb.JPG.37af3150954576aaaf9d0e95e8c02da2.JPGIMG_6979.thumb.JPG.6280afdccea95c0d2c9437996bf2aa44.JPGIMG_6981.thumb.JPG.c8ae4a01c87b395086588b2f2861141a.JPGIMG_6982.thumb.JPG.5eee9ef242de873a5842ac112ab86d29.JPG

IMG_6989.thumb.JPG.d7c5bffd180c65439d9f9430b2622e0e.JPGIMG_6990.thumb.JPG.2f6aa1d79fb3426e96e03355fa730893.JPG

 

  • Like 3

Share this post


Link to post
Share on other sites

well most of the first planking is complete, however it surrounds the two upperdecks, and i wanted to deck the midships section, so i have delayed that, The deck planks are Lime 3mm, as i find the supplied 3mm brown strips very brittle and to dark for my liking

altogether, this is working out very well, everything is fitting better (well im happy anyway)

 

 

IMG_7014.thumb.JPG.93e8ee5b931bc755b0984a24571d852f.JPG

 

 

IMG_7015.thumb.JPG.6b2292f8e850f4ce17dfec3e4a1d5e83.JPGIMG_7020.thumb.JPG.ed6d1596eec56b399a1400da31809214.JPGIMG_7021.thumb.JPG.bd3a3d652d3c825871e629515a1606ab.JPGIMG_7022.thumb.JPG.6a6c003262e51fa76dfbe4ad48fa465b.JPGIMG_7023.thumb.JPG.285272b2ae81a4d8bdc0fb80aaa9e654.JPG

 

  • Like 3

Share this post


Link to post
Share on other sites

Good evening everyone

well the main decking is done, and had one coat of diluted water based varnish, and is actually better than i thought and 1000% better than that previous effort i did.

Next will be to work on the cabins under the decks, to allow the two upper false decks to be fitted/planked, then i can complete 2nd planking

 

12 years ago

164750260_hobbyamerigovespucci(98).JPG.79c176c8f768a6310460d08bf3778a31.JPG

IMG_7024.thumb.JPG.f1abbb3ba33ed4313d93d9e8e4bc5958.JPG

prior to sanding port side with supervisor checking on progress

IMG_7025.thumb.JPG.f43ce8e5ec5d1be8502ec8d71f2882b6.JPGIMG_7026.thumb.JPG.a4a1ccdfcb6b699ee0e8e4cbbf3c0262.JPGIMG_7027.thumb.JPG.fe939f427a0d7d2937e2a68096bceb68.JPGIMG_7030.thumb.JPG.6d3951c9a2f94f9c474b4f26921903d2.JPGIMG_7031.thumb.JPG.7d44ffef5d74ee741441aa9b5673abf3.JPGIMG_7032.thumb.JPG.0936fc15d84634811e9f9cc3bf1b9774.JPGIMG_7033.thumb.JPG.9cdad86a58b37a001b05b68668e1485a.JPG

 

  • Like 1

Share this post


Link to post
Share on other sites

good afternoon everyone

 

once the deck was completed, i wanted to sort the bulkheads under the 1/4 deck. the originals were broken up and used as templates

IMG_7036.thumb.JPG.57adcb8eec7e8d3ed98e81425df63ead.JPGIMG_7037.thumb.JPG.55c87004e19c73f2d34f6b817241e0c1.JPGIMG_7038.thumb.JPG.736662669fa3d4cade4e1db6848f5a70.JPGIMG_7039.thumb.JPG.e0e53de5b2d6827764099c7ef19fd9e1.JPGIMG_7040.thumb.JPG.350550396517ca2f5d029e7ad59dd24a.JPGIMG_7041.thumb.JPG.6576b5166bce2dc1c92ef54891db9295.JPGIMG_7042.thumb.JPG.ea17584be9b7665a192f65a4dd1d8f47.JPGIMG_7043.thumb.JPG.422d2030b6c0329347945f375aa90ed3.JPG

  • Like 2

Share this post


Link to post
Share on other sites

Good morning everyone

 

1st planking continues, but as i correct things, i keep removing more of the original build, so i might have a few issues getting the new to match whats left when the 2nd planking is complete, yes it would have been easier to strip it all back but hopefully i can rescue all this and get her back to pre-strip down

the bow is much better than before and the stern, is now the troublesome area but the shape is right

 

this is the most fun i have had since the last time i had fun, if how ever it does not look right, i will send her to to big model ship scrapyard in the sky, the frame will not take this much treatment again

the map pins are keeping the vertical planks in place, 

IMG_7063.thumb.JPG.ef49610e7895549efe0ea8fa8f8c8158.JPG

IMG_7068.thumb.JPG.d1f2c39664cc9b627b4e00a889f09cd8.JPGIMG_7052.thumb.JPG.f668a75a57cf2f6256326b0e4fd1038a.JPGIMG_7066.thumb.JPG.c3821fc9cb21c0c7de4f5953ec5c7b53.JPGIMG_7064.thumb.JPG.88d69a19a4415642da256de92f67938d.JPGIMG_7067.thumb.JPG.5b76842c5766b798ae968fccce65ed17.JPG

  • Like 1

Share this post


Link to post
Share on other sites
40 minutes ago, Grunhertz said:

That bow looks awesome 

thank you, im sure there will still be problems in that area, like getting the bowspit lined up, 2nd planking, and the curved bulkhead that sits on top of it like in the phot, 

IMG_6915.thumb.JPG.5dd3ae5978ac90ae7a472e3fb553820d.JPG

Edited by Kevin
  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...