A channel for modellers "Igmar_TV-ScaleModels".

[Igmar_1 51]

Hello colleagues.
I am communicating with the help of a virtual translator.
I have created an authoring channel on YouTube for modellers. Come in, watch, subscribe.
Nothing to see on TV anyway.
You can choose subtitles in the following languages: Arabic Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Portuguese, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

[Col. 8,051]

This teaser looks good Igmar.

[Igmar_1 51]

Thank you, colleagues. Unfortunately, some of the videos, without subtitles, but I will try to correct this shortcoming. I plan to make videos about creating photo etched at home.

[Igmar_1 51]

Hello, colleagues.
The process of making photo etching with my own hands, in this video, is disclosed - completely. Come in, look, subscribe well and you can donate.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

[Igmar_1 51]

A small addition to the last video.
When making a layout ("CorelDRAW" or "Adobe Illustrator"), you need to provide a frame in which the details will be inscribed, and these same details need to connect jumpers between themselves and the frame, and jumpers to draw only on the back of the layout. The frame is 2 mm., wide and bridges 0.5 mm. It is easier to control the etching process and you will not have to assemble the ready product in a scattered manner. Transparency agent is more suitable in the ratio of 1 g., of caustic soda per 100 ml., of hydrogen peroxide. The instructions of photoresist say that development process should not last more than 1 minute. Etching solution - too much chemicals, you can safely divide them in half of the amount stated in the video, and maybe a little more than 50%. Etching should be carried out without boiling, slow of course, but it will be of higher quality. I don't seem to have forgotten anything.

[Igmar_1 51]

Hello.
The way you can reduce the diameter of copper wire, with a simple tool, in this video. Come in, watch and subscribe.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

[Igmar_1 51]

We are launching a new section (playlist) called: "Putting together a model". Let's start with a copy of the lightweight Soviet T-26 tank at a scale of 1:35, from the manufacturer "Hobby Boss". Before assembly - overview of the model, look at the box, see what's in the box and attach parts to the drawings.
Come in, have a look, subscribe.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

[Igmar_1 51]

 Wire cutters - it's hard to imagine modelling without this tool. Let's take a look at the update and improve their cutting qualities. In the video there is not only testing, but also "crash test".

 

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

 

Edited July 12 by Igmar_1

[Igmar_1 51]

Hello.
The new video is devoted to one useful tool called jewellery hacksaw. We will consider the design, tooling to it, saws and technique of work.
Visit the channel, put likes and subscribe.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

 

[Igmar_1 51]

Good afternoon.
We continue to work on the model of light, Soviet tank, T-26, in scale 1/35, "Hobby Boss". Determined inaccuracies made by the manufacturer, which we begin to eliminate.
Visit the channel, put likes and subscribe. Thank you.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

[Igmar_1 51]

Hello.
We compare solvents - pinene and white spirit, for art works. We make our own flush from oil paints, make a comparison, experiment.
Visit the channel, put likes and subscribe. Thank you.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

 

 

 

Edited September 8 by Igmar_1

[Igmar_1 51]

Hello.
Model of the First World War fighter, "Albtros D.III", scale 1/32, manufacturer "Roden". Let's look at the box, look inside the box, examine the contents of the box, attach the parts to the drawings.
Visit the channel, watch the video, put likes and subscribe.
Thank you.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

[Igmar_1 51]

Greetings, colleagues.
We continue to work on the model of the Soviet light tank "T-26", namely - to bring it in line with the 1935 model.
Visit the channel, subscribe, put likes.
Thank you.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.

 

[Igmar_1 51]

Hello.
The process of making a miniature tree. Material preparation - copper wire, drawing, annealing, stretching, rolling out on a cone.
Come in, watch, subscribe, like.
Thank you.

You can choose subtitles in the following languages: Arabic, Portuguese, Bulgarian, Croatian, Czech, Danish, English, Finnish, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Korean, Chinese (China, Singapore, Taiwan, Hong Kong), Norwegian, Polish, Romanian, Slovak, Slovenian, Turkish, Spanish, Swedish and Serbian.